Products
Destroyer roll up Sled
$ 210.00
After seeing how people gets frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department:) got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.
Destroyer roll up sled
Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;
Weights 2 lb. 12 oz. 1,272 gm without runners add 6,6 oz. 188 gm.
Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.
Pre drilled holes to secure the Dyneema® bag with a light weigh straps and ITW buckles;
Mainly designed to use ropes to save weight but you can added yourself a 5/8 PVC piping to get that effect of the poles.
View full product details
RM-GEAR Flagship bag
$ 350.00
After seeing how people get frustrated about transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled. After fully tested last year by a former RM-GEAR tester on a 430-mile race, I'm confident that the sled/bag will fit most runners, if not I'm flexible in making your dream bag.
Based on our best seller Dyneema® DCF bag, now upgraded with a truly anticut UHMW-PE Challenge® 400 D fabric will fit neatly on the Destroyer sled.
More details about the new fabric
- Extremely high tear and tensile strength
- Maximal cut, abrasion, and wear resistance
- Super high and long term waterproofing
- 400D UHMWPE/polyester plain woven face
- 0.5 mil Recycled PET film backing
Bag details
The front features a built-in sleeping bag compression sack, with anticut DWR fabric to help to squeeze out the air.
The main compartment has a double zipper #10 PU coated located on the top; this helps to get access by a rubber zipper puller mitten friendly to your gear with ease.
The rear includes a pouch; on it can be attached a GPS device, vinyl pocket for bib race number, and can be accessed via zipper.
Interior pockets made with Dynnema® and anticut woven spandex, one on each side the bag to help you organize your gear.
Small interior pocket made with reinforced clear vinyl to help seeing small objects such as keys.
3 RM-GEAR logos with 3M reflective placed strategically to increase visibility.
Custom name with 3M reflective material (free of charge) is placed, plus your nationality embroidery flag (free of charge).
Seams are fully taped with original Dynnema® tape making it100% fully waterproof.
Weight 34 oz. (936 g)
Capacity:
Main compartment measures 34x12x12 (80 liters)
Rear pouch measures 12x8x5 (8 liters)
Inside pocket measures 13.5X3.5X12 5 litter
Sleeping Bag sack 12.5x12 (23 liters)
Total capacity 111 liters
Extras: includes a small set of tools to put together the sled, 2 hook and loop straps to hold the sled.
View full product details
RM-GEAR Flagship sled/bag
$ 520.00
After seeing how people get frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.
Destroyer roll up sled
Our made to order Combo, Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;
Weights 2 lb.12 oz. 1,272 gm without runners add 6.6 oz. 188 gm
Pre drilled holes to secure the Flagship bag with a light weigh straps and ITW buckles.
Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.
Mainly designed to use with our sled mate or our collapsible/rigid poles.
Based on our best seller Dyneema® DCF bag, now upgraded with a truly anticut UHMW-PE Challenge® 400 D fabric will fits neatly on the Destroyer sled;
More details about that new fabric
- Extremely high tear and tensile strength
- Maximal cut, abrasion, and wear resistance
- Super high and long term waterproofing
- 400D UHMWPE/polyester plain woven face
- 0.5 mil Recycled PET film backing
Bag details
On the front, features a build in sleeping bag compression sack, with anticut DWR fabric to help to squeeze out the air;
The main compartment has a double zipper #10 PU coated located on the top this helps to get access by a rubber zipper puller mitten friendly to your gear with easy;
On the rear is located a pouch, on it can be attached a GPS device, vinyl pocket for bib race number; and can be access via zipper;
Interior pocket made with Dynnema® and anticut woven spandex is located one side of that bag to help you organize your gear
Small interior pocket made with reinforced clear vinyl to help to see small objects such as keys;
3 RM-GEAR logos with 3M reflective placed strategically to increase visibility;
Custom name with 3M reflective material (free of charge) is placed plus your nationality embroidery flag (free of charge);
Seams are fully taped with Original Dynnema® tape making it 100% fully waterproof
Removable straps
Weights 34 oz. 936 g
Capacity
Main compartment measures 34X12X12 80 liters
Rear pouch measures 12X5.5X12 8 liters
Inside pocket measures 13.5X3.5X12 5 liters
Sleeping Bag sack 12.5X12 23 liters
Total capacity 111 Liters
Extras: includes a small set of tools to put together the sled;
View full product details
RM-GEAR Flagship sled/bag big daddy
$ 600.00
ALL SPEC TO BE CONFIRMED
After seeing how people get frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.
Destroyer roll up sled
Our made to order Combo, Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;
Weights 2 lb.12 oz. 1,272 gm without runners add 6.6 oz. 188 gm
Pre drilled holes to secure the Dyneema® bag with a light weigh straps and ITW buckles.
Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.
Mainly designed to use with sled mate or our collapsible/rigid poles.
Its made out Dyneema® composite fabric 2.92 oz and fits neatly on the Destroyer sled;
On the front, features a build in sleeping bag compression sack, with eVent® fabric to help to squeeze out the air;
The main compartment has a double zipper #8 PU coated located on the top this helps to get access to your gear with easy;
On the rear is located a removable pouch, on it can be attached a GPS device, vinyl pocket for bib race number;
3 RM-GEAR logos with 3M reflective;
Custom name with 3M reflective material (free of charge) is placed plus your nationality embroidery flag (free of charge);
100% fully waterproof
Weights 16.1 oz. 457 gm;
Capacity
Main compartment measures 34X12X12 80 liters
Rear pouch measures 12X5.5X12 8 liters
Sleeping Bag sack 12.5X12 23 liters
Total capacity 111 Liters
Extras: includes a small set of tools to put together the sled;
View full product details
