Aurora "altitude simulation" coming soon

rm-gear.com

Sold Out

   Model Aurora-01

Bear Proof Bag

rm-gear.com

$ 75.00 $ 85.00

This bag is made out UHMWPE knitted fabric level 3 cut resistant, sewed with UHMWPE thread for maximum strength.

A liner made out ripstop aluminized fabric to reduce the odor of your yummy backpacking food is included along with throw bear hanging kit.

Capacity 10 L

Weight 6.5 oz

12x17 when is lay flat

Custom letting 4 sled' bag

rm-gear.com

$ 15.00

We are offering the option on adding to your sled's bag a custom letting with 3M reflective material 

usable space is 26cm X 4cm

Destroyer roll up Sled

rm-gear.com

$ 210.00

After seeing how people gets frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department:) got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.

Destroyer roll up sled

Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;

Weights 2 lb. 12 oz. 1,272 gm without runners add 6,6 oz. 188 gm.

Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.  

Pre drilled holes to secure the Dyneema® bag with a light weigh straps and ITW buckles;

Mainly designed to use ropes to save weight but you can added yourself a 5/8 PVC piping to get that effect of the poles. 

Finisher beanie

rm-gear.com

$ 29.00

Color Purple Teal Raspberry Pink

Color

Purple

Teal

Raspberry Pink

Qty

Add to Cart

A must have item for cold days training or to wear at work to show your coworkers that you did it.

Made out genuine Polartec Alpha direct (inner layer) paired with Polartec Power dry to help to remove moisture quickly. Our lovely Arrowhead 135 and Finisher lettering are made with 3M reflective material

Note: when ordering please tell me that year of your finish,  

Made in Minnesota, of course:)

Fully Customized Fat Bike Frame Bag

rm-gear.com

$ 135.00

Spanish Teal / Olive/yellow / any Bahamas Blue / Olive/yellow / any Yellow / Olive/yellow / any Black / Olive/yellow / any Navy / Olive/yellow / any Bright Purple / Olive/yellow / any Slate Grey / Olive/yellow / any

Main color

Spanish Teal

Bahamas Blue

Yellow

Black

Navy

Bright Purple

Slate Grey

Liner

Olive/yellow

Size

any

Qty

Add to Cart

This listing is for a fully customized Fat Bike frame bag; prior to placing your order, please contact me through our contact form on this website.  

Our bags are custom-made to meet your specifications.

 FEATURES

Double zipper on main compartment for accessibility

Left or right zipper upon request

Fully lined with bright nylon fabric for better visibility

Padded down tube with closed cell foam

2 small mesh pockets on the down tube

2 mesh pockets for organization/storage per side wall

Hydration port exit ready

Water resistant zipper #8 is protected by storm flap

  SPECS

Main fabric Terrain X-Pac VX21

Liner 1.9 oz ripstop nylon in olive/yellow

1050 denier ballistic coated nylon

Custom-made molded tooth TPU coated #8 zipper

Men's Gaiters

rm-gear.com

$ 23.00 $ 20.00

M / Black M / Brown M / Royal Blue M / Carbon Grey M / Maroon M / Red LG / Black LG / Brown LG / Royal Blue LG / Carbon Grey LG / Maroon LG / Red XL / Black XL / Brown XL / Royal Blue XL / Carbon Grey XL / Maroon XL / Red L / Blue/black XL / Blue/Black L / Black/Yellow XL / Red/Black XL / Mossy Oak L / Mossy Oak XL / Black/Maroon L / Black/Maroon L / Black/Blue M / Blue/Black M / Black/Yellow

Size

M

LG

XL

L

Color

Black

Brown

Royal Blue

Carbon Grey

Maroon

Red

Blue/black

Blue/Black

Black/Yellow

Red/Black

Mossy Oak

Black/Maroon

Black/Blue

Qty

Add to Cart

DETAILS

The summer gaiters are designed to prevent mud and dirt from getting into your shoes, strapless for easy collocation before and during races.  The back is secured with a hook-n-loop, while the front has a heavy duty metal hook (same as our winter gaiters).  

SPECS

Made of SunScreen50™ Activewear 4-way Stretch fabric:

• Wicks moisture from the body

• Fast evaporation for comfort

• UPF 50+ UV sun protection 

Average weight (Men's Medium 1.25 oz)

We provide up to 3 sets of adhesive Velcro® plus 4 alcohol pads for easy cleaning.

Men's Best gaiter of its class! Available Mid Nov

rm-gear.com

Sold Out

The winter gaiters are designed for endurance athletes, looking for lightweight and waterproof element that is ideal for winter ultra races or long runs.  Our gaiters feature a waterproof, breathable  Polartec® Neoshell® fabric construction, making it perfect for snowy days on the trail. And to ensure waterproofness we seam-taped along with Velcro® Military grade fastener is now placed behind for comfort.  

The gaiters are built for endurance:

• 3-layer Polartec® Neoshell®
• 840 Ballistic nylon
• BioThane® strap and Metal
• Riveted metal hook
• Velcro® Military grade fastener
• 3.7/8 oz per pair (Men's L)

 Made in the US of imported materials

Reflective Vest

rm-gear.com

$ 26.00

One size / blue One size / yellow One size / pink

Size

One size

Color

blue

yellow

pink

Qty

Add to Cart

DETAILS

Highly reflective, light weight and easy to adjust when layering up. Unisex one size fits all.

 SPECS

 Made of soft 1 1/2  florescent elastic webbing  and 15mm reflective strip

100% polyester

Average weight 4 1/8 oz, 118 g. 

Tagless 

58 squares inches of high reflective for night visibility and 116 square inches of  florescent color for day light

This Reflective vest meets and exceed the requirements at Arrowhead 135, Tuscobia Winter Ultra, and St Croix 40, races

RM-GEAR collapsible/rigid composite poles

rm-gear.com

$ 140.00

Designed to work in conjunction with our pulling system (harness) and our destroyer sled, made out special composite to flex in extreme conditions.

FULL DESCRIPTION COMING SOON

RM-GEAR Flagship bag

rm-gear.com

$ 350.00

color red trimming All black

color

red trimming

All black

Qty

Add to Cart

After seeing how people get frustrated about transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled. After fully tested last year by a former RM-GEAR tester on a 430-mile race, I'm confident that the sled/bag will fit most runners, if not I'm flexible in making your dream bag.

Based on our best seller Dyneema® DCF bag, now upgraded with a truly anticut UHMW-PE Challenge® 400 D fabric will fit neatly on the Destroyer sled.

More details about the new fabric 

• Extremely high tear and tensile strength
• Maximal cut, abrasion, and wear resistance
• Super high and long term waterproofing

- 400D UHMWPE/polyester plain woven face

- 0.5 mil Recycled PET film backing

Bag details

The front features a built-in sleeping bag compression sack, with anticut DWR fabric to help to squeeze out the air.

The main compartment has a double zipper #10 PU coated located on the top; this helps to get access by a rubber zipper puller mitten friendly to your gear with ease.

The rear includes a pouch; on it can be attached a GPS device, vinyl pocket for bib race number, and can be accessed via zipper.

Interior pockets made with Dynnema® and anticut woven spandex, one on each side the bag to help you organize your gear.

Small interior pocket made with reinforced clear vinyl to help seeing small objects such as keys.

3 RM-GEAR logos with 3M reflective placed strategically to increase visibility.  

Custom name with 3M reflective material (free of charge) is placed, plus your nationality embroidery flag (free of charge).

Seams are fully taped with original Dynnema® tape making it100% fully waterproof.

Weight 34 oz. (936 g)

Capacity:

Main compartment measures 34x12x12 (80 liters)

Rear pouch measures 12x8x5 (8 liters)

Inside pocket measures 13.5X3.5X12 5 litter

Sleeping Bag sack 12.5x12 (23 liters)

Total capacity 111 liters

Extras: includes a small set of tools to put together the sled, 2 hook and loop straps to hold the sled.

RM-GEAR Flagship sled/bag

rm-gear.com

$ 520.00

After seeing how people get frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.

Destroyer roll up sled

Our made to order Combo, Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;

Weights 2 lb.12 oz. 1,272 gm without runners add 6.6 oz. 188 gm

Pre drilled holes to secure the Flagship bag with a light weigh straps and ITW buckles.

Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.  

Mainly designed to use with our sled mate or our collapsible/rigid poles. 

Based on our best seller Dyneema® DCF bag, now upgraded with a truly anticut UHMW-PE Challenge® 400 D fabric will fits neatly on the Destroyer sled;

More details about that new fabric

• Extremely high tear and tensile strength
• Maximal cut, abrasion, and wear resistance
• Super high and long term waterproofing

- 400D UHMWPE/polyester plain woven face

- 0.5 mil Recycled PET film backing

Bag details

On the front, features a build in sleeping bag compression sack, with anticut DWR fabric to help to squeeze out the air;

The main compartment has a double zipper #10 PU coated located on the top this helps to get access by a rubber zipper puller mitten friendly to your gear with easy; 

On the rear is located a pouch, on it can be attached a GPS device, vinyl pocket for bib race number; and can be access via zipper;

Interior pocket made with Dynnema® and anticut woven spandex is located one side of that bag to help you organize your gear

Small interior pocket made with reinforced clear vinyl to help to see small objects such as keys; 

3 RM-GEAR logos with 3M reflective placed strategically to increase visibility;   

Custom name with 3M reflective material (free of charge) is placed  plus your nationality embroidery flag (free of charge);

Seams are fully taped with Original Dynnema® tape making it 100% fully waterproof

Removable straps 

Weights 34 oz. 936 g  

Capacity 

Main compartment measures 34X12X12 80 liters

Rear pouch measures 12X5.5X12 8 liters

Inside pocket measures 13.5X3.5X12 5 liters

Sleeping Bag sack 12.5X12 23 liters

Total capacity 111 Liters

Extras: includes a small set of tools to put together the sled;

RM-GEAR Flagship sled/bag big daddy

rm-gear.com

$ 600.00

ALL SPEC TO BE CONFIRMED

After seeing how people get frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.

Destroyer roll up sled

Our made to order Combo, Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;

Weights 2 lb.12 oz. 1,272 gm without runners add 6.6 oz. 188 gm

Pre drilled holes to secure the Dyneema® bag with a light weigh straps and ITW buckles.

Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.  

Mainly designed to use with sled mate or our collapsible/rigid poles. 

Its made out Dyneema® composite fabric 2.92 oz and fits neatly on the Destroyer sled;

On the front, features a build in sleeping bag compression sack, with eVent® fabric to help to squeeze out the air;

The main compartment has a double zipper #8 PU coated located on the top this helps to get access to your gear with easy; 

On the rear is located a removable pouch, on it can be attached a GPS device, vinyl pocket for bib race number;

3 RM-GEAR logos with 3M reflective;

Custom name with 3M reflective material (free of charge) is placed  plus your nationality embroidery flag (free of charge);

100% fully waterproof 

Weights 16.1 oz. 457 gm;  

Capacity 

Main compartment measures 34X12X12 80 liters

Rear pouch measures 12X5.5X12 8 liters

Sleeping Bag sack 12.5X12 23 liters

Total capacity 111 Liters

Extras: includes a small set of tools to put together the sled;

RM-GEAR Flagship waist belt

rm-gear.com

$ 120.00

Unisex Medium / Wolf print Unisex Large / wolf print Unisex Medium / Owl print Unisex Large / Owl print Unisex Medium / Mushing print Unisex Large / Mushing print Unisex Medium / Custom artwork Unisex Large / Custom artwork Unisex Large / Aurora Borealis Unisex Medium / Aurora Borealis

Size

Unisex Medium

Unisex Large

Color

Wolf print

wolf print

Owl print

Mushing print

Custom artwork

Aurora Borealis

Qty

Add to Cart

DETAILS

An all-around durable and lightweight harness designed with winter racing in mind, motivated and inspired by my Double Tuscobia and Arrowhead races. The Flagship one its the lighter version of our previous waist belt, but this particular the front is fully customized, plus it's made out UHMW-PE woven, level 4 anti cut fabric

SPECS

Made of UHMW-PE woven anti cut level 4 fabric, contour shape for better comfort; 13 mm padding; 2 strong loops to receive most climbing .

Back: made of polyester 1/8 hole mesh

Weight: 5.5 oz 154 grams

Pouch Description

Outside: the front panel is 100% polyester with the artwork print of your choice the rest of the panels are made of UHMW-PE woven, Vinyl pocket for bib number;  #3 water resistant zipper 

Inside: fully lined with Polartec® power fill, and anti cut woven stretch dividers

Weight: 4 oz  112grams

total weigh 9.5 oz  268 grams

RM-GEAR Pole-Pogies

rm-gear.com

$ 130.00

These pogies were designed for people who want to keep their hands dry and warm but also be more efficient when using poles. With these pogies, finally all energy force applied to the poles wouldn't be lost or interfered as with mittens.

These pogies also work perfectly when winter racing like power-hiking (aka running), skiing and snowshoeing. The design is compatible with any poles thanks to the low profile Velcro® placed just where the pogies will be resting, which prevents from shifting.

Features

RM-GEAR Red LED Light (PAY 3 AND GET 4)

rm-gear.com

$ 25.00 $ 30.00

A must carry item regardless of your propulsion mode on winter racing. fully tested and approved by the 300 mile man, me:) 

Features

RM-GEAR WAIST BELT Dyneema® 2.92 oz DCF

rm-gear.com

$ 105.00

Unisex Medium / Black trim Unisex Medium / Blue trim Unisex Medium / Red trim Unisex Large / Black trim Unisex Large / Blue trim Unisex Large / Red trim

Size

Unisex Medium

Unisex Large

Color

Black trim

Blue trim

Red trim

Qty

Add to Cart

DETAILS

An all-around durable and lightweight harness designed with winter racing in mind, motivated and inspired by my Double Tuscobia and Arrowhead races. The 2.0 its the lighter version of our previous waist belt.  

SPECS

Front: made of genuine 2.92 oz Dyneema® DCF; contour shape for better comfort; 13 mm padding; 2 strong loops to receive most climbing carabiners.

Back: made of polyester 1/8 hole mesh

Weight: 4.58 oz 130 grams

Pouch Description

Outside: made of genuine  2.92 oz Dyneema® DCF, Vinyl pocket for bib number; 2 rubbers loops for light attachments; 5 YKK® 3M reflective RM-GEAR LOGO;  area for customized flag embroidery

Inside: because a light weigh comes with a price this pouch does not have any pocket or dividers. 

Weight: 1.8 oz  50 grams

total weigh 6.31 oz  179 grams

Shock-Absorbing Sled-Mate

rm-gear.com

$ 35.00

colo Red, Black Florescent yellow

colo

Red,

Black

Florescent yellow

Qty

Add to Cart

DETAILS

Designed to work in conjunction with our RM-GEAR waist belt .  

SPECS

Construction: V shape in one end for attaching to the hardness, and the other end it has a small loop to attach a Carabiner to your sled. Note: Carabiner is not included,

X box stitch on critical areas

Cold weatherproof shock cord

Material: 1" wide nylon tubular webbing, Tensile Strength: 4,000 lbs (17.7 kg).   

Length: 65 inches

Weight: approx. 4.5 oz.

Adaptations upon request. we can increase the length of the sled line, or sewing one of our snap shackles. 

Sled Spare Parts

rm-gear.com

$ 20.00

This set of spare parts has

UHMW-PE sled runners

Stainless steel fasteners 

Set of mini tools 

Studs

rm-gear.com

Sold Out

DETAILS

Don't let the icy trail to keep you at home, these studs are perfect for to replace a damage or lost stud on your fat bike tire, these are the same as the ones the comes on your Dillinger tire, The only difference is the price

SPECS

Made out aluminum body with a steel tip

Just 1.1 Oz per 100 pcs 

Whistle

rm-gear.com

$ 10.00

A great survival gadget - aluminum made whistle with outstanding 150 decibels at 0.82 oz.  

 P.S. I hear that it's required at Arrowhead and Tuscobia.  :)

Women's Best gaiter of its class! available by mid- Nov

rm-gear.com

$ 50.00

Medium / Royal Blue/Black Medium / Yellow/Black Medium / Black/Black Large / Royal Blue/Black Large / Yellow/Black Large / Black/Black X Large / Royal Blue/Black X Large / Yellow/Black X Large / Black/Black

Size

Medium

Large

X Large

Color

Royal Blue/Black

Yellow/Black

Black/Black

Qty

Add to Cart

The winter gaiters are designed for endurance athletes, looking for lightweight and waterproof element that is ideal for winter ultra races or long runs.  Our gaiters feature a waterproof, breathable  Polartec® Neoshell® fabric construction, making it perfect for snowy days on the trail. And to ensure waterproofness we seam-taped along with Velcro® Military grade fastener is now placed behind for comfort.  

The gaiters are built for endurance:

• 3-layer Polartec® Neoshell®
• 840 Ballistic nylon
• BioThane® strap and Metal
• Riveted metal hook
• Velcro® Military grade fastener
• 3.7/8 oz per pair (Men's L)

 Made in the US of imported materials

Women's Gaiters

rm-gear.com

$ 23.00

SM / Black SM / Brown SM / Royal Blue SM / Hot Pink SM / Carbon Grey SM / Maroon SM / Turquoise SM / Red M / Black M / Brown M / Royal Blue M / Hot Pink M / Carbon Grey M / Maroon M / Turquoise M / Red LG / Black LG / Brown LG / Royal Blue LG / Hot Pink LG / Carbon Grey LG / Maroon LG / Turquoise LG / Red SM / Fushsia

Size

SM

M

LG

Color

Black

Brown

Royal Blue

Hot Pink

Carbon Grey

Maroon

Turquoise

Red

Fushsia

Qty

Add to Cart

The summer gaiters are designed to prevent mud and dirt from getting into your shoes, strapless for easy collocation before and during races.  The back is secured with a hook-n-loop, while the front has a heavy duty metal hook (same as our winter gaiters).  

Made of SunScreen50™ Activewear 4-way Stretch fabric:

• Wicks moisture from the body
• Fast evaporation for comfort
• UPF 50+ UV sun protection 

Average weight (Men's Medium 1.25 oz)

We provide up to 3 sets of adhesive Velcro® plus 4 alcohol pads for easy cleaning.