rm-gear.com
Aurora "altitude simulation" coming soon
Sold Out
Model Aurora-01
| Flow Rate | 0-10LPM |
| Oxygen Purity |
93% (±3%) |
| Hypoxic flow | 100LPM |
| Hypoxic purity | 9-20.9% (±3%) |
| Simulated Alititude | 0-6500M |
| Outlet Pressure | 0.04-0.07MPA |
| Sound Level | ≤50db |
| Power Consumption | ≤550W |
| LCD Display | Starting times,Operating pressure, Present Working Time,Accumulating Time, presetting Time from 10mins to 40hours |
| Alarm | Power failure alarm, High&Low pressure alarm,Temperature alarm |
| Net Weight | 27KG |
| Size | 365x375x600mm |
Bear Proof Bag
$ 75.00 $ 85.00
This bag is made out UHMWPE knitted fabric level 3 cut resistant, sewed with UHMWPE thread for maximum strength.
A liner made out ripstop aluminized fabric to reduce the odor of your yummy backpacking food is included along with throw bear hanging kit.
Capacity 10 L
Weight 6.5 oz
12x17 when is lay flat
View full product details
Destroyer roll up Sled
$ 210.00
After seeing how people gets frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department:) got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.
Destroyer roll up sled
Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;
Weights 2 lb. 12 oz. 1,272 gm without runners add 6,6 oz. 188 gm.
Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.
Pre drilled holes to secure the Dyneema® bag with a light weigh straps and ITW buckles;
Mainly designed to use ropes to save weight but you can added yourself a 5/8 PVC piping to get that effect of the poles.
View full product details
Destroyer roll up Sled & Dyneema® DCF 5.0
$ 470.00
After seeing how people get frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.
Destroyer roll up sled
Our made to order Combo, Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;
Weights 2 lb.12 oz. 1,272 gm without runners add 6.6 oz. 188 gm
Pre drilled holes to secure the Dyneema® bag with a light weigh straps and ITW buckles.
Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.
Mainly designed to use with our sled mate or our collapsible/rigid poles.
Its made out Dyneema® composite fabric 5.0 oz and fits neatly on the Destroyer sled;
On the front, features a build in sleeping bag compression sack, with eVent® fabric to help to squeeze out the air;
The main compartment has a double zipper #8 PU coated located on the top this helps to get access by a rubber zipper puller mitten friendly to your gear with easy;
On the rear is located a removable pouch, on it can be attached a GPS device, vinyl pocket for bib race number;
3 RM-GEAR logos with 3M reflective;
Custom name with 3M reflective material (free of charge) is placed plus your nationality embroidery flag (free of charge);
100% fully waterproof
Weights 31 oz. 879 gm;
Capacity
Main compartment measures 34X12X12 80 liters
Rear pouch measures 12X5.5X12 8 liters
Sleeping Bag sack 12.5X12 23 liters
Total capacity 111 Liters
Extras: includes a small set of tools to put together the sled;
View full product details
Finisher beanie
$ 29.00
A must have item for cold days training or to wear at work to show your coworkers that you did it.
Made out genuine Polartec Alpha direct (inner layer) paired with Polartec Power dry to help to remove moisture quickly. Our lovely Arrowhead 135 and Finisher lettering are made with 3M reflective material
Note: when ordering please tell me that year of your finish,
Made in Minnesota, of course:)
View full product details
Fully Customized Fat Bike Frame Bag
$ 135.00
This listing is for a fully customized Fat Bike frame bag; prior to placing your order, please contact me through our contact form on this website.
Our bags are custom-made to meet your specifications.
FEATURES
Double zipper on main compartment for accessibility
Left or right zipper upon request
Fully lined with bright nylon fabric for better visibility
Padded down tube with closed cell foam
2 small mesh pockets on the down tube
2 mesh pockets for organization/storage per side wall
Hydration port exit ready
Water resistant zipper #8 is protected by storm flap
SPECS
Main fabric Terrain X-Pac VX21
Liner 1.9 oz ripstop nylon in olive/yellow
1050 denier ballistic coated nylon
Custom-made molded tooth TPU coated #8 zipper
View full product details
Men's Gaiters
Sold Out $ 20.00
DETAILS
The summer gaiters are designed to prevent mud and dirt from getting into your shoes, strapless for easy collocation before and during races. The back is secured with a hook-n-loop, while the front has a heavy duty metal hook (same as our winter gaiters).
SPECS
Made of SunScreen50™ Activewear 4-way Stretch fabric:
-
Wicks moisture from the body
-
Fast evaporation for comfort
-
UPF 50+ UV sun protection
Average weight (Men's Medium 1.25 oz)
We provide up to 3 sets of adhesive Velcro® plus 4 alcohol pads for easy cleaning.
View full product details
Men's Best gaiter of its class! Available Mid Nov
Sold Out
The winter gaiters are designed for endurance athletes, looking for lightweight and waterproof element that is ideal for winter ultra races or long runs. Our gaiters feature a waterproof, breathable Polartec® Neoshell® fabric construction, making it perfect for snowy days on the trail. And to ensure waterproofness we seam-taped along with Velcro® Military grade fastener is now placed behind for comfort.
The gaiters are built for endurance:
- 3-layer Polartec® Neoshell®
- 840 Ballistic nylon
- BioThane® strap and Metal
- Riveted metal hook
- Velcro® Military grade fastener
- 3.7/8 oz per pair (Men's L)
Made in the US of imported materials
View full product details
Reflective Vest
$ 26.00
DETAILS
Highly reflective, light weight and easy to adjust when layering up. Unisex one size fits all.
SPECS
Made of soft 1 1/2 florescent elastic webbing and 15mm reflective strip
100% polyester
Average weight 4 1/8 oz, 118 g.
Tagless
58 squares inches of high reflective for night visibility and 116 square inches of florescent color for day light
This Reflective vest meets and exceed the requirements at Arrowhead 135, Tuscobia Winter Ultra, and St Croix 40, races
View full product details
RM-GEAR collapsible/rigid composite poles
Sold Out
Designed to work in conjunction with our pulling system (harness) and our destroyer sled, made out special composite to flex in extreme conditions.
FULL DESCRIPTION COMING SOON
View full product details
RM-GEAR Flagship bag
$ 350.00
After seeing how people get frustrated about transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled. After fully tested last year by a former RM-GEAR tester on a 430-mile race, I'm confident that the sled/bag will fit most runners, if not I'm flexible in making your dream bag.
Based on our best seller Dyneema® DCF bag, now upgraded with a truly anticut UHMW-PE Challenge® 400 D fabric will fit neatly on the Destroyer sled.
More details about the new fabric
- Extremely high tear and tensile strength
- Maximal cut, abrasion, and wear resistance
- Super high and long term waterproofing
- 400D UHMWPE/polyester plain woven face
- 0.5 mil Recycled PET film backing
Bag details
The front features a built-in sleeping bag compression sack, with anticut DWR fabric to help to squeeze out the air.
The main compartment has a double zipper #10 PU coated located on the top; this helps to get access by a rubber zipper puller mitten friendly to your gear with ease.
The rear includes a pouch; on it can be attached a GPS device, vinyl pocket for bib race number, and can be accessed via zipper.
Interior pockets made with Dynnema® and anticut woven spandex, one on each side the bag to help you organize your gear.
Small interior pocket made with reinforced clear vinyl to help seeing small objects such as keys.
3 RM-GEAR logos with 3M reflective placed strategically to increase visibility.
Custom name with 3M reflective material (free of charge) is placed, plus your nationality embroidery flag (free of charge).
Seams are fully taped with original Dynnema® tape making it100% fully waterproof.
Weight 34 oz. (936 g)
Capacity:
Main compartment measures 34x12x12 (80 liters)
Rear pouch measures 12x8x5 (8 liters)
Inside pocket measures 13.5X3.5X12 5 litter
Sleeping Bag sack 12.5x12 (23 liters)
Total capacity 111 liters
Extras: includes a small set of tools to put together the sled, 2 hook and loop straps to hold the sled.
View full product details
RM-GEAR Flagship sled/bag
$ 520.00
After seeing how people get frustrate on transporting their own sled or paying high rental fees when racing overseas, once again the RM-GEAR product development department got together to design the sled, and after fully tested last year by a former RM-GEAR tester on a 430 miles race, I'm confident that the sled/bag will fit most runners, if not I'm flexible on making your dream bag.
Destroyer roll up sled
Our made to order Combo, Its made out UHMW 1.5 mm thick, includes 2 small runners to add stability specially going down hill (runners can be removed if needed, the sled is fastened with stainless steel screws;
Weights 2 lb.12 oz. 1,272 gm without runners add 6.6 oz. 188 gm
Pre drilled holes to secure the Flagship bag with a light weigh straps and ITW buckles.
Measurements 45" in length point to point, (34.5" in the flat part) 12" of width, with 4" side walls.
Mainly designed to use with our sled mate or our collapsible/rigid poles.
Based on our best seller Dyneema® DCF bag, now upgraded with a truly anticut UHMW-PE Challenge® 400 D fabric will fits neatly on the Destroyer sled;
More details about that new fabric
- Extremely high tear and tensile strength
- Maximal cut, abrasion, and wear resistance
- Super high and long term waterproofing
- 400D UHMWPE/polyester plain woven face
- 0.5 mil Recycled PET film backing
Bag details
On the front, features a build in sleeping bag compression sack, with anticut DWR fabric to help to squeeze out the air;
The main compartment has a double zipper #10 PU coated located on the top this helps to get access by a rubber zipper puller mitten friendly to your gear with easy;
On the rear is located a pouch, on it can be attached a GPS device, vinyl pocket for bib race number; and can be access via zipper;
Interior pocket made with Dynnema® and anticut woven spandex is located one side of that bag to help you organize your gear
Small interior pocket made with reinforced clear vinyl to help to see small objects such as keys;
3 RM-GEAR logos with 3M reflective placed strategically to increase visibility;
Custom name with 3M reflective material (free of charge) is placed plus your nationality embroidery flag (free of charge);
Seams are fully taped with Original Dynnema® tape making it 100% fully waterproof
Removable straps
Weights 34 oz. 936 g
Capacity
Main compartment measures 34X12X12 80 liters
Rear pouch measures 12X5.5X12 8 liters
Inside pocket measures 13.5X3.5X12 5 liters
Sleeping Bag sack 12.5X12 23 liters
Total capacity 111 Liters
Extras: includes a small set of tools to put together the sled;
View full product details
RM-GEAR Flagship waist belt
$ 120.00
DETAILS
An all-around durable and lightweight harness designed with winter racing in mind, motivated and inspired by my Double Tuscobia and Arrowhead races. The Flagship one its the lighter version of our previous waist belt, but this particular the front is fully customized, plus it's made out UHMW-PE woven, level 4 anti cut fabric
SPECS
Made of UHMW-PE woven anti cut level 4 fabric, contour shape for better comfort; 13 mm padding; 2 strong loops to receive most climbing .
Back: made of polyester 1/8 hole mesh
Weight: 5.5 oz 154 grams
Pouch Description
Outside: the front panel is 100% polyester with the artwork print of your choice the rest of the panels are made of UHMW-PE woven, Vinyl pocket for bib number; #3 water resistant zipper
Inside: fully lined with Polartec® power fill, and anti cut woven stretch dividers
Weight: 4 oz 112grams
total weigh 9.5 oz 268 grams
View full product details
RM-GEAR Pole-Pogies
$ 130.00
These pogies were designed for people who want to keep their hands dry and warm but also be more efficient when using poles. With these pogies, finally all energy force applied to the poles wouldn't be lost or interfered as with mittens.
These pogies also work perfectly when winter racing like power-hiking (aka running), skiing and snowshoeing. The design is compatible with any poles thanks to the low profile Velcro® placed just where the pogies will be resting, which prevents from shifting.
Features
- Temperature rating - 50°F
- 3M 210gm two-ply synthetic insulation; Polartec thermal Pro, Extreme Warmth, lining
- Sew on 3M reflective
- Small buckle to attach the pogies to the RM-GEAR hardness belt
Technical specs
| Best Use | Running, Skiing, Snowshoeing |
|---|---|
| Fabric |
eVent 3L waterproof ripstop nylon
|
| Insulated |
Yes
|
| Weight |
15 oz. pair
|
RM-GEAR Red LED Light (PAY 3 AND GET 4)
$ 25.00 $ 30.00
A must carry item regardless of your propulsion mode on winter racing. fully tested and approved by the 300 mile man, me:)
Features
- 100-lumen flashes makes you stand out in broad daylight and at night
- Chose from 3 modes (Steady 50 lummen, Steady 100 lummen, or Flash)
- 1 button interface
- Runs on 2 AAA battery lasts up to an impressive 60 hours
- Compact, water-resistant design weighs only 46g
- Seatpost and seatstay mounts included
It can be attached on our sled bag, waist belt pouch, reflective vest, bike seat post, or to your trekking poles.
RM-GEAR WAIST BELT Dyneema® 2.92 oz DCF
$ 105.00
DETAILS
An all-around durable and lightweight harness designed with winter racing in mind, motivated and inspired by my Double Tuscobia and Arrowhead races. The 2.0 its the lighter version of our previous waist belt.
SPECS
Front: made of genuine 2.92 oz Dyneema® DCF; contour shape for better comfort; 13 mm padding; 2 strong loops to receive most climbing carabiners.
Back: made of polyester 1/8 hole mesh
Weight: 4.58 oz 130 grams
Pouch Description
Outside: made of genuine 2.92 oz Dyneema® DCF, Vinyl pocket for bib number; 2 rubbers loops for light attachments; 5 YKK® 3M reflective RM-GEAR LOGO; area for customized flag embroidery
Inside: because a light weigh comes with a price this pouch does not have any pocket or dividers.
Weight: 1.8 oz 50 grams
total weigh 6.31 oz 179 grams
View full product details
Shock-Absorbing Sled-Mate
$ 35.00
DETAILS
Designed to work in conjunction with our RM-GEAR waist belt .
SPECS
Construction: V shape in one end for attaching to the hardness, and the other end it has a small loop to attach a Carabiner to your sled. Note: Carabiner is not included,
X box stitch on critical areas
Cold weatherproof shock cord
Material: 1" wide nylon tubular webbing, Tensile Strength: 4,000 lbs (17.7 kg).
Length: 65 inches
Weight: approx. 4.5 oz.
Adaptations upon request. we can increase the length of the sled line, or sewing one of our snap shackles.
View full product details
Studs
Sold Out
DETAILS
Don't let the icy trail to keep you at home, these studs are perfect for to replace a damage or lost stud on your fat bike tire, these are the same as the ones the comes on your Dillinger tire, The only difference is the price
SPECS
Made out aluminum body with a steel tip
Just 1.1 Oz per 100 pcs
View full product details
Whistle
$ 10.00
A great survival gadget - aluminum made whistle with outstanding 150 decibels at 0.82 oz.
P.S. I hear that it's required at Arrowhead and Tuscobia. :)
View full product details
Women's Best gaiter of its class! available by mid- Nov
$ 50.00
The winter gaiters are designed for endurance athletes, looking for lightweight and waterproof element that is ideal for winter ultra races or long runs. Our gaiters feature a waterproof, breathable Polartec® Neoshell® fabric construction, making it perfect for snowy days on the trail. And to ensure waterproofness we seam-taped along with Velcro® Military grade fastener is now placed behind for comfort.
The gaiters are built for endurance:
- 3-layer Polartec® Neoshell®
- 840 Ballistic nylon
- BioThane® strap and Metal
- Riveted metal hook
- Velcro® Military grade fastener
- 3.7/8 oz per pair (Men's L)
Made in the US of imported materials
View full product details
Women's Gaiters
Sold Out $ 20.00
The summer gaiters are designed to prevent mud and dirt from getting into your shoes, strapless for easy collocation before and during races. The back is secured with a hook-n-loop, while the front has a heavy duty metal hook (same as our winter gaiters).
Made of SunScreen50™ Activewear 4-way Stretch fabric:
- Wicks moisture from the body
- Fast evaporation for comfort
- UPF 50+ UV sun protection
Average weight (Men's Medium 1.25 oz)
We provide up to 3 sets of adhesive Velcro® plus 4 alcohol pads for easy cleaning.
View full product details
